Laying flooring is an important and difficult process, because not only the aesthetic appearance of a room, warehouse or office, but the convenience of moving around it depends on it. Therefore, it is so necessary that the installation of floor coverings is carried out by professionals using only high-quality tools and building materials.

One of the last stages of the overhaul of an apartment is the laying of floor coverings, the type of which had to be determined even before the start of repair and finishing works. Before repairing, it is very important to have an idea of ​​which room, which cover will be laid. This information is necessary to perform high-quality preparation for laying flooring. There are several types of coatings with differences in structure, density, thickness, etc. These parameters should be taken into account when performing floor preparation.

Preparing the floor for laying flooring involves leveling the plane and floor level for a certain type of flooring. Given this parameter, it is possible to achieve a single floor plane in the apartment, regardless of the type of flooring. But the preparation of the floor should take into account not only the thickness of the flooring, but also the material from which it is made. So for laying linoleum, floor preparation should be carried out using finely divided mixtures to obtain the smoothest surface. To prepare the floor for laying the laminate, it is sufficient to use conventional mixtures for screeding. Laying a parquet board in Kharkov is done in two ways – floating and fixed. In the first case, preparation for laying the laminate is enough, in the second – plywood sheets are mounted on the screed, on which the parquet board is laid with glue.

The final stage of laying flooring is the installation of the plinth. Skirting boards have several varieties, the technology of their installation depends on this. The easiest way to install a plastic baseboard. They are mounted using self-tapping screws or dowels, and the joining of the corners is performed using plastic connectors. In the case of skirting boards made of wood, MDF or polyurethane, the corners are joined by trimming them at an angle of 45 °. Skirting boards made of MDF and polyurethane are installed on a special glue, and skirting boards made of wood – using self-tapping screws or dowels. The process of laying flooring of any type has its own subtleties, the thorough possession of which is acquired only with experience. Therefore, only the application of the necessary technology in certain conditions can guarantee the long-term operation of any high-quality flooring.